Inform your service representative of the malfunction code displayed on the screen.Ĭlean the Slit Scan Glass using a dry cloth. If the problem is not resolved or released, inform your service representative of the malfunction code displayed on the screen.
Take the appropriate action according to the message displayed on the screen. The machine malfunctioned and is unable to make copies. Re-load the indicated number of original pages into the ADF. (1) Dispose of punch hole scrap stored in the Punch Scrap Box.Īfter removing a paper jam, you need to restore the original pages ejected from the ADF.
(1) The waste box has become full of punch hole scraps. Otherwise, contact your service representative.Īccording to the maintenance agreement, prepare a spare Toner Cartridge.Īccording to the maintenance agreement, replace the indicated Toner Cartridge.Ĭopying cannot be performed due to a paper jam.įollow the guidance (instructions) to remove jammed paper. Reinstall each consumable and replaceable part. The Toner Cartridge is not installed correctly. There is a limit to the number of pages that can be printed by account.Ĭontact the administrator of the machine.Ĭopying failed as the door or cover of this machine is open or the optional device is not securely closed.īe sure to securely close the door or cover of this machine that is marked with, and the door or cover of the optional device. You must enter your account name and correct password to perform copying.Įnter the account name and correct password. or press the key.]Īccount track settings have been configured. You must enter your user name and correct password to perform copying.Įnter your user name and correct password. Remove all paper from the tray marked with. To delete the job, press the key.]Ĭopying failed as the Output Tray of the Finisher/ Job Separator marked with has reached its capacity. Rotate the original by 90 degrees to load it correctly. The image will be cut off with the current orientation of the original. (2) Select the paper size and start copying. (2) The original is a custom size or a small size that cannot be detected. (1) The original is not loaded correctly. Load paper of the appropriate size into the Bypass Tray.
Paper of a suitable size is not loaded in the Bypass Tray. Paper of a suitable size is not loaded in a paper tray.Įither select paper of a different size or load paper of a suitable size. Remove the original from the Original Glass. The original has been left on the Original Glass.